loader image

American Attic, Oakland, California

Tips on How to Insulate Your Attic Effectively

It pays to know how to better insulate your attic if you want to save money on heating and cooling. This is important since poor or insufficient insulation can result in a variety of issues, including increased climate control expenses.

Mold and mildew problems are common, and ice dams can form in some attics during the colder months. To avoid these issues, you’ll want to know everything you can about insulation and how it’s installed.

Determine Your R-Values

The first step is to figure out what climate zone you live in. This is required in order to get the right R-value for your attic insulation. The type of insulation and its capacity to manage heat flow determine the R-value. The higher the R-value, the better the insulation quality. Knowing your climate zone can aid you in determining the appropriate R-value range for your attic.

Inspect Your Insulation

After consulting a climatic zone and attic insulation guide to establish what R-rating you need, have your insulation evaluated to determine its quality. Insulation can get old and worn out, losing its effectiveness, or it might be installed inappropriately in some cases. If the attic, for example, is properly insulated but feels too chilly in the winter or too hot in the summer, the insulation may be old or unsuitable.

This could be solved by either adding to the existing insulation or removing and replacing it. You can contact us, American Attic to help you with your attic insulation and other attic-related problems. Dealing with your attic insulation right away will let you save energy, and in the long run, money in terms of heating and cooling expenses.

Decide On The Type Of Insulation You’ll Use.

Another piece of advice for improved attic insulation is to use suitable insulation. Loose-fill and blanket insulation are two types of attic insulation that are commonly used.

Loose-fill insulation is made of rock wool, fiberglass, or cellulose and is ideal for areas that are difficult to access or have uneven-shaped spaces. Because it is often blown into place with special machinery, this form of insulation is often referred to as blown-in insulation.

Blanket insulation is made of rock wool or fiberglass and comes in the form of rolls or batts. This sort of installation is intended for standard-sized rooms. But, in some situations, we may cut and trim rolls and batts to fit non-standard locations.

If you need additional attic insulation tips, visit our website or give us a call today to learn more about our expert insulation removal and attic insulation services that best suits your needs. Call us today!

Leave a comment

Your email address will not be published. Required fields are marked *

Get $200 off your first service!